Adeept Arduino UNO R3 Board ATmega328P ATmega16U2 with USB Cable

Description

The Arduino UNO is a microcontroller board based on the ATmega328. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.

Technical Specifications:
- Microcontroller: ATmega328
- Operating Voltage: DC5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital IO Pins: 4 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per IO Pin: 40mA
- DC Current for 3.3V Pin: 50mA
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz

Package List:
1x Adeept Arduino UNO R3 Board
1x USB Cable